Enginehouse

Manufacturer:

Altoona Model Works

Manufacturer ID:

S-004

Category:

Enginehouse

Name:

Single Stall Engine House

Model Introduced:

2010

Product Type:

Wood Kit

Finish:

unpainted

Notes:

The base is CNC-milled MDF, with slots cut for rail required (code 148, 125, Hi-rail, special rail, etc.). Fits a 2-8-0.

Manufacturer:

B.T.S. (click for web site)

Manufacturer ID:

07450

Category:

Enginehouse

Name:

McCabe Backwoods Engine House

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Originally Master Creations kit #210.

Manufacturer:

B.T.S. (click for web site)

Manufacturer ID:

07502

Category:

Enginehouse

Name:

Single-stall Switcher Shed

Product Type:

Wood Kit

Finish:

unpainted

Scale Dimensions:

22' x 70'

Manufacturer:

B.T.S. (click for web site)

Manufacturer ID:

07508

Category:

Enginehouse

Name:

Two-stall Engine House

Model Introduced:

2002

Product Type:

Wood Kit

Finish:

unpainted

Scale Dimensions:

41' x 101'

Notes:

With a 12'x24' shop extension. A product review can be found in the June 2012 issue of the NASG's Dispatch (page 20). Discontinued in 2010, but B.T.S. did another run in May of 2023.

Manufacturer:

banta modelworks

Category:

Enginehouse

Name:

Shortline Enginehouse

Model Introduced:

1998

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

banta modelworks

Category:

Enginehouse

Name:

Two-stall Enginehouse

Model Introduced:

1998

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Footprint: ?? x 73' deep.

Manufacturer:

Building & Structure Co.

Category:

Enginehouse

Name:

2-stall Engine House

Product Type:

Plaster Kit

Finish:

unpainted

Manufacturer:

Building & Structure Co.

Category:

Enginehouse

Name:

3-stall Brick Enginehouse

Model Introduced:

1998

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Building & Structure Co.

Manufacturer ID:

111

Category:

Enginehouse

Name:

Double Stall Engine House

Model Introduced:

1998

Product Type:

Hydrocal, plastic kit

Finish:

unpainted

Notes:

Pete Smith, one time owner of Building & Structure Co., speculated that this kit might be collaboration between Thomas York and Village Depot, as the box label is by Village Depot but the instructions for the kit are by York.

Manufacturer:

Building & Structure Co.

Manufacturer ID:

4010

Category:

Enginehouse

Name:

Single-stall Engine House

Model Introduced:

1996

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Intended for use with up to 54-foot Sn3 engines.

Manufacturer:

Classic Miniatures

Manufacturer ID:

52401

Category:

Enginehouse

Name:

Keeler Engine House

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Southern Pacific narrow-gauge.

Manufacturer:

Clever Models LLC

Manufacturer ID:

S27

Category:

Enginehouse

Name:

Engine House at Gorre

Product Type:

Cardstock Kit

Finish:

pre-printed

Notes:

Print the O-scale version at 75% to get the S-scale version.

Manufacturer:

Clever Models LLC

Manufacturer ID:

S100

Category:

Enginehouse

Name:

Modern Steel Enginehouse

Product Type:

Cardstock Kit

Finish:

pre-printed

Notes:

Print the O-scale version at 75% to get the S-scale version.

Manufacturer:

Crystal River Products (click for web site)

Manufacturer ID:

129-21

Category:

Enginehouse

Name:

Two-Stall Engine House

Product Type:

Wood Kit

Finish:

unpainted

Notes:

An interior kit and and addition kit are also available.

Manufacturer:

Finest Kind Models

Manufacturer ID:

113

Category:

Enginehouse

Name:

2-stall Engine House

Model Introduced:

1986

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Korber Models

Manufacturer ID:

S309

Category:

Enginehouse

Name:

Diesel Enginehouse

Model Introduced:

1997

Product Type:

Plastic Kit

Finish:

unpainted

Scale Dimensions:

18" x 9-1/4"

Notes:

The original version was made out of urethane resin castings, but the newer versions are made out of injection-molded plastic.

Manufacturer:

Lehigh Valley Models (click for web site)

Manufacturer ID:

LVM12

Category:

Enginehouse

Name:

Diesel House

Model Introduced:

1981

Product Type:

Craftsman Kit

Finish:

unpainted

Supplemental:

view

Notes:

The structure measures 21-1/2". Although designed as a diesel house, it can be easily changed to a locomotive works facility, a car repair facility, or even a factory. It is 10" wide, and the track centers are 5-1/2" apart. The kit was re-run in 1992 with improved brick impressions (silk-screened matboard manufactured by "Scratch" Model Building Supplies). The second photo shows the model on Frank's layout.

Manufacturer:

Lehigh Valley Models (click for web site)

Manufacturer ID:

LVM43

Category:

Enginehouse

Name:

Engine House

Model Introduced:

1998

Product Type:

Craftsman Kit

Finish:

unpainted

Notes:

Straight, two-track brick building used for small railroads or branchlines. Footprint: 6-1/2"x19".

Manufacturer:

Mini-Structures

Manufacturer ID:

5301

Category:

Enginehouse

Name:

Allen Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Notes:

2-stall, 66-foot.

Manufacturer:

Mini-Structures

Manufacturer ID:

6201

Category:

Enginehouse

Name:

Allen Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Notes:

2-stall, 132-foot.

Manufacturer:

Mini-Structures

Manufacturer ID:

6301

Category:

Enginehouse

Name:

Allen Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Notes:

4-stall, 66-foot.

Manufacturer:

Mini-Structures

Manufacturer ID:

6701

Category:

Enginehouse

Name:

Diesel Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Notes:

120-foot.

Manufacturer:

Mini-Structures

Manufacturer ID:

6801

Category:

Enginehouse

Name:

Allen Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Notes:

4-stall, 132-foot.

Manufacturer:

Mini-Structures

Manufacturer ID:

7201

Category:

Enginehouse

Name:

Crawford Notch Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Mini-Structures

Manufacturer ID:

21001

Category:

Enginehouse

Name:

Rico Engine House

Model Introduced:

1985

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Portland Locomotive Works

Category:

Enginehouse

Name:

Kingfield Engine House

Product Type:

Laser-cut Wood Kit

Finish:

unpainted

Manufacturer:

Portland Locomotive Works

Manufacturer ID:

Kingfield

Category:

Enginehouse

Name:

Kingfield Car Shop

Road Name:

Sandy River & Rangeley Lakes (SR&RL)

Product Type:

Laser-cut Wood Kit

Finish:

unpainted

Manufacturer:

Portland Locomotive Works

Manufacturer ID:

Maple

Category:

Enginehouse

Name:

Maplewood Station

Road Name:

Sandy River & Rangeley Lakes (SR&RL)

Product Type:

Laser-cut Wood Kit

Finish:

unpainted

Manufacturer:

Print Station 3D (click for web site)

Category:

Enginehouse

Name:

Single Engine House

Model Introduced:

2024

Product Type:

3D-printed Plastic Kit

Finish:

molded in color

Notes:

Arrives unpainted. Photo shows fully completed model.

Manufacturer:

Ragg's... to Riches? (click for web site)

Manufacturer ID:

OUE

Category:

Enginehouse

Name:

Ouray Engine House

Model Introduced:

2006

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Rocky Mountain Model Works

Category:

Enginehouse

Name:

Rico Enginehouse

Model Introduced:

1995

Product Type:

Wood Kit

Finish:

unpainted

Manufacturer:

Triangle Scale Models

Manufacturer ID:

T-154

Category:

Enginehouse

Name:

Two-stall Enginehouse

Model Introduced:

1984

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Footprint: 7"x12.3". Designed for up to a Sn3 K-27. May fit small standard-gauge engines.

Manufacturer:

Triangle Scale Models

Manufacturer ID:

T-158

Category:

Enginehouse

Name:

Enginehouse

Model Introduced:

1984

Product Type:

Wood Kit

Finish:

unpainted

Notes:

Three stalls. This kit represents a generic D&RGW roundhouse. It was designed for Sn3, but Bob converted his to standard-gauge. Roger Malinowski did the hydrocal castings for the kit. Milled basswood was provided for the interior bracing. Grandt Line castings were provided for the roof smoke vents and windows. The first photo shows the back of the building, the second one shows the front of the Sn3 version, and the third photo shows Bob's standard-gauge version. The remaining photos show the kit's parts.